当前位置:首页 > 450吨锡线挤压生产设备 > 重型轧机

重型轧机

重型轧机

dy.jpg

各齿轮均采用硬齿面和磨齿工艺;

All gears adopt hard tooth surface and grinding process;

 

各传动轴均采用加强型设计;

All transmission shafts adopt reinforced design;

 

采用大直径轧辊,轧辊直径¢104,与传统轧辊相比,更易咬入,相同产能下可获得更低的转速和更高的强度;

Large-diameter rolling rolls are used, with a roll diameter of ¢104. Compared with traditional rolling rolls, they are more easily bitten into, and under the same production capacity, lower speed and higher strength can be obtained.

 

各部件的密封和润滑都采用双层密封;

All parts are sealed and lubricated with double-layer sealing;

 

电机功率22KW,配齿轮减速箱与主箱体直连,并采用变频调速;(变频器品牌为台达)

The motor power is 22KW, and it is directly connected to the main gearbox with a gear reduction box, and uses frequency conversion speed regulation; (The brand of the frequency converter is Delta)

 

轧线范围:¢16¢5.5,一个主箱,八个分箱。轧制速度:最快每分钟出线64米。

Rolling range: ¢16¢5.5, one main box, eight sub-boxes. Rolling speed: the fastest output speed is 64 meters per minute.



广州精准机械有限公司

地址:广州市黄埔区茅岗路828号广州机械科学研究院30号楼

GUANGZHOU JINGZHUN MACHINERY CO., LTD.

Guangzhou Mechanical Engineering Research Institute,No. 828, Maogang Road, Huangpu District, Guangzhou

精信(乐昌)机械有限公司

地址:广东省乐昌市经济开发区环园东路17号

JINGXIN(LECHANG) MACHINERY CO., LTD.

No.17, Huanyuan East Road, Lechang Economic Development District, Guangdong


电话:+860-20-32388019 / +860-751-5559268

传真:+860-20-32388021

邮箱:gdjzjx@163.com

网址:gzjingzhun.com

版权所有 广州精准机械有限公司     备案号: 粤ICP备13027984号